Homes in Kingston upon Thames (KT2) at a glance
This page summarises 11,135 energy performance certificates (EPCs) for homes in Kingston upon Thames (KT2), using the most recent certificate for each home. 48% are rated D or lower.
The median floor area is about 78 m².
Half of these certificates were issued in 2020 or later, so most describe homes as they are now or were within the last few years.
What kinds of homes are here
Flats make up 57% of the certificates here. For flats, the practical questions come before the technology: who owns the building, whether the freeholder or management company must approve external equipment, and whether there is space for a hot water cylinder indoors. Shared or communal systems are often a better fit than one-off installs in individual flats.
Who owns the homes here
Tenure is mixed: of the certificates that record it, 61% are owner-occupied, 27% privately rented and 12% socially rented. Who can approve an upgrade differs between those groups, so it is worth knowing which applies before asking for quotes.
Privately rented homes in England and Wales must currently reach at least an E rating to be let, with some exemptions, and are upgraded by their landlords, so landlords are the people to talk to about those homes.
Walls and insulation
38% of the sampled homes have solid walls. These lose more heat than insulated cavity walls and cannot be filled like a cavity, so options are internal or external wall insulation, which cost more and take more planning. A heat pump can still work in a solid-wall home, but a proper heat-loss survey matters, and it is worth asking installers how they sized the system.
How homes are heated
Mains gas serves 81% of the sampled homes, so the area splits between households replacing a gas boiler and those already paying for another fuel, most often electric heating (16%). The sensible starting point differs between those two groups.
When homes were built
Building age is spread across eras: 25% before 1930, 32% from 1930 to 1975, 21% from 1976 to 2002 and 23% from 2003. Advice should follow the individual home's construction rather than the area average.
Lofts and windows
32% of homes with a roof of their own have no loft or roof insulation recorded, or less than 100 mm. Loft insulation is usually one of the simpler upgrades, and EPC recommendations work towards about 270 mm. Rooms in the roof and flat roofs are harder and need a closer look.
17% of homes still have some single-glazed windows. In older or listed buildings, secondary glazing is often the permitted option.
Energy ratings
Most homes sit in bands C and D, with 15% rated E to G. For those homes the EPC recommendations are a useful check on which upgrades are still outstanding.
Improvements suggested for homes in Kingston upon Thames (KT2)
Across the 11,135 certificates here, the improvements suggested most often are solar panels for electricity (41%), solid wall insulation (internal or external) (38%) and floor insulation (35%).
A heat pump is suggested on fewer than 1% of certificates here, which says more about the assessment software than about the homes.
Ask an installer about solar panels insulation
Heat pump grants across Kingston upon Thames
Boiler Upgrade Scheme figures are published for local authorities, not postcode districts. Across Kingston upon Thames, 177 heat pump installations have had a grant paid (May 2022 to September 2026).
Installers in and around Kingston upon Thames (KT2)
Companies House-registered installers listed for Kingston upon Thames: 2 installers name Kingston upon Thames on their own website as an area they cover, 24 installers have their registered office within 5 miles, 8 more say on their website that they work across Kingston upon Thames and 22 more only name the county on their website. 13 of the 56 mention heat pumps.
The typical firm has been trading for 5 years (the median, from Companies House incorporation dates).
The first listed are Electro Heating Limited, SFX Group Ltd and Brookvex Security Limited.
Says it fits air source heat pump, solar PV, battery storage, EV charging, underfloor heating, boilers
Says it holds MCS
SFX Group Ltd
Says it fits solar PV, battery storage, EV charging
Says it holds MCS
Brookvex Security Limited
Says it fits air source heat pump, ground source heat pump, air to air heat pump, solar PV, solar thermal, battery storage, EV charging, biomass, underfloor heating, boilers
Says it holds MCS, TrustMark, NICEIC
Joltify Ltd
Says it fits solar PV, battery storage, EV charging
Says it holds MCS, HIES, NICEIC
Eco Watt Solutions Ltd
Says it fits solar PV, battery storage, EV charging
Says it holds MCS, NAPIT
Sol4r Energy Ltd
Says it fits solar PV, battery storage, EV charging
Says it holds MCS, TrustMark, HIES, NAPIT, ISO 9001, ISO 14001
Lanka Property Services Limited
Says it fits solar PV, solar thermal, battery storage, EV charging, boilers
Says it holds MCS, PAS 2035
Switched On London Ltd
Says it fits battery storage, boilers, EV charging, solar PV, underfloor heating
Says it holds Gas Safe, MCS, NAPIT, NICEIC, RECC, TrustMark
Commercial & Industrial Lighting Solutions Ltd
Says it fits solar PV, solar thermal
Says it holds ISO 9001
West Essex Heating Ltd
Robert Heath Heating Limited
RAD Electrical Ltd
Meehan Heating Limited
We Know Energy Ltd
SOL-IFY Ltd
JM Build Ltd
Says it fits underfloor heating, boilers
Says it holds NAPIT, FMB
Sonnat Construction and Maintenance Co Ltd.
M@e Projects Ltd
Tilt Solar Ltd
Kavanagh Electrical Solutions Ltd
Rudge Energy Limited
Sustainable Electrical Services Ltd
We Wire Electrical Contractors Limited
Says it fits solar PV, battery storage, EV charging
Sustainergy Ltd
These are the first 24 of 56: firms that name this area first, then those with a registered office nearby, then those that cover the wider area; heat pump firms and the nearest first within each.
Listed from each firm's own website and from Companies House records (contains public sector information licensed under the Open Government Licence v3.0). Being listed is not a recommendation, and what firms say about themselves has not been checked: ask for an installer's MCS certificate number and consumer code membership before you sign anything.
How Kingston upon Thames (KT2) compares with Kingston upon Thames
For each of homes with solid walls, homes not on mains gas, flats, detached or semi-detached homes, homes built before 1930, privately rented homes, homes with unfilled cavity walls, homes with little or no loft insulation, homes rated E, F or G, owner-occupied homes, socially rented homes, homes with some single glazing, the share here is within 10 percentage points of the Kingston upon Thames figure. The largest gap is in homes with solid walls (38% here, 45% across Kingston upon Thames), so the wider area's picture is a fair guide for Kingston upon Thames.
Kingston upon Thames (KT2) and its neighbours
Kingston Town (KT1) is about 1 mile away. Flats are more common there: 69% of certificates, against 57% in Kingston upon Thames.
Teddington (TW11) is about 2 miles away, over the border in Richmond upon Thames. Homes built before 1930 are more common there: 39% of certificates, against 25% in Kingston upon Thames.
Kingston upon Thames (KT3) is about 2 miles away. Flats are less common there: 39% of certificates, against 57% in Kingston upon Thames (KT2).
How Kingston upon Thames (KT2) ranks within Kingston upon Thames
Of the 6 Kingston upon Thames postcode districts with a page on this site, Kingston upon Thames (KT2) has the highest share of homes not on mains gas (19%), the 2nd-lowest share of detached or semi-detached homes (49%) and the 2nd-lowest share of homes with little or no loft insulation (32%).
Grants and support (England)
The Boiler Upgrade Scheme rules (who qualifies, what it covers and how the installer applies) are summarised on the Kingston upon Thames page, with a link to the official GOV.UK guidance.
Boiler Upgrade Scheme summary on the Kingston upon Thames page →